SWATCH-MIB.txt

--      Copyright (c) 2000, 2001 by Extreme Networks
--      All rights reserved.
--      $Id: SWATCH-MIB.txt,v 1.1.1.1 2001/03/07 19:43:36 tflagg Exp $
--
-- MIB for ServiceWatch Network Services health and performance monitor
--
-- 1.3.6.1.4.1.1931.1.1.2.1.1  
-- 1 2 3 4 5 6  7   8 9101112
-- iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).dms(1931).
--      dmsMib(1).isPerf(1).isTable(3).isEntry(1).isIndex(1)
--
-- .iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).dms(1931).
--      dmsMib(1).isPerf(1).isTable(3).isEntry(1).isStatus(3).X = ...
--
-- iso.org.dod.internet.private.enterprises.dms.dmsmib.isperf.istable.isentry.
--      isresponsetime.X
--
-- DMS Trap OID:
-- 1.3.6.1.4.1.1931.1.2


SWATCH-MIB DEFINITIONS ::= BEGIN

          IMPORTS
                  mgmt, NetworkAddress, IpAddress, Counter, Gauge,
                          TimeTicks
                      FROM RFC1155-SMI
                  OBJECT-TYPE
                          FROM RFC-1212
                enterprises
                        FROM RFC1155-SMI
                OBJECT-TYPE
                        FROM RFC-1212
                DisplayString
                        FROM RFC1213-MIB
                TRAP-TYPE
                        FROM RFC-1215;

          --  This MIB module uses the extended OBJECT-TYPE macro as
          --  defined in [14];

          --  MIB-II (same prefix as MIB-I)

--          mib-2      OBJECT IDENTIFIER ::= { mgmt 1 }

          -- textual conventions

--        DisplayString ::=
--            OCTET STRING
          -- This data type is used to model textual information taken
          -- from the NVT ASCII character set.  By convention, objects
          -- with this syntax are declared as having

          --
          --      SIZE (0..255)

          PhysAddress ::=
              OCTET STRING
          -- This data type is used to model media addresses.  For many
          -- types of media, this will be in a binary representation.
          -- For example, an ethernet address would be represented as
          -- a string of 6 octets.


             RequestStatus ::= INTEGER {
                   -- the following two values are states:
                   -- these values may be read or written
                   active(1),
                   inactive(2),
                   -- the next value is a state.
                   -- this value may be read, but not written
                   -- (However it, never occurs in ServiceWatch)
                   notReady(3),
                   -- the following three values are
                   -- actions: these values may be written,
                   --  but are never read.
                   -- createAndgo(4) is not used by ServiceWatch.
                   createAndGo(4),
                   createAndWait(5),
                   remove(6)
               }

          -- groups in MIB-II

--          system       OBJECT IDENTIFIER ::= { mib-2 1 }
--          interfaces   OBJECT IDENTIFIER ::= { mib-2 2 }
--          at           OBJECT IDENTIFIER ::= { mib-2 3 }
--          ip           OBJECT IDENTIFIER ::= { mib-2 4 }
--          icmp         OBJECT IDENTIFIER ::= { mib-2 5 }
--          tcp          OBJECT IDENTIFIER ::= { mib-2 6 }
--          udp          OBJECT IDENTIFIER ::= { mib-2 7 }
--          egp          OBJECT IDENTIFIER ::= { mib-2 8 }

          -- historical (some say hysterical)
          -- cmot      OBJECT IDENTIFIER ::= { mib-2 9 }

--          transmission OBJECT IDENTIFIER ::= { mib-2 10 }

--          snmp         OBJECT IDENTIFIER ::= { mib-2 11 }

-- MIB for the ServiceWatch Agent network services monitoring.

        --  This MIB module uses the extended OBJECT-TYPE macro as
        --  defined in [14];

        --  MIB-II (same prefix as MIB-I)

        dms             OBJECT IDENTIFIER ::= { enterprises 1931 }

        dmsMib          OBJECT IDENTIFIER ::= { dms 1 }

        isPerf          OBJECT IDENTIFIER ::= { dmsMib 1 }

----
-- Agent identity
----
        swatchSnmpAgent      OBJECT IDENTIFIER ::= { dms 250 }
        hpux9             OBJECT IDENTIFIER ::= { swatchSnmpAgent 1 }
        hpux10            OBJECT IDENTIFIER ::= { swatchSnmpAgent 6 }
        sunos4            OBJECT IDENTIFIER ::= { swatchSnmpAgent 2 }
        solaris           OBJECT IDENTIFIER ::= { swatchSnmpAgent 3 }
        osf               OBJECT IDENTIFIER ::= { swatchSnmpAgent 4 }
        ultrix            OBJECT IDENTIFIER ::= { swatchSnmpAgent 5 }
        netbsd1           OBJECT IDENTIFIER ::= { swatchSnmpAgent 7 }
        freebsd           OBJECT IDENTIFIER ::= { swatchSnmpAgent 8 }
        irix              OBJECT IDENTIFIER ::= { swatchSnmpAgent 9 }
        linux             OBJECT IDENTIFIER ::= { swatchSnmpAgent 10 }
        bsdi              OBJECT IDENTIFIER ::= { swatchSnmpAgent 11 }
        openbsd           OBJECT IDENTIFIER ::= { swatchSnmpAgent 12 }
        win32             OBJECT IDENTIFIER ::= { swatchSnmpAgent 13 }
        unknown           OBJECT IDENTIFIER ::= { swatchSnmpAgent 255 }

        -- the isPerf group

        isNumber OBJECT-TYPE
                SYNTAX  INTEGER
                ACCESS  read-only
                STATUS  mandatory
                DESCRIPTION
                        "The number of network servers currently
                        monitored by this agent."
                ::= { isPerf 1 }

        isNextIndex OBJECT-TYPE
                SYNTAX  INTEGER
                ACCESS  read-only
                STATUS  mandatory
                DESCRIPTION
                        "The next available row index that can be used for
                        the creation of a new ServiceWatch request.  If there
                        are no available rows, 0 is returned."
                ::= { isPerf 2 }

        isTable OBJECT-TYPE
                SYNTAX  SEQUENCE OF IsEntry
                ACCESS  not-accessible
                STATUS  mandatory
                DESCRIPTION
                        "The list of network servers and their
                        status.  The number of entries is given
                        by the value of isNumber."
                ::= { isPerf 3 }

        isEntry OBJECT-TYPE
                SYNTAX  IsEntry
                ACCESS  not-accessible
                STATUS  mandatory
                DESCRIPTION
                        "An entry for a network server containing
                        objects describing the health and performance
                        of the network server."
                INDEX   { isIndex }
                ::= { isTable 1 }

        IsEntry ::=
                SEQUENCE {
                        isIndex
                                INTEGER,
                        isRequestName
                                DisplayString,
                        isStatus
                                RequestStatus,
                        isURL
                                DisplayString,
                        isUsername
                                DisplayString,
                        isPassword
                                DisplayString,
                        isProxy
                                DisplayString,
                        isServiceStatus
                                INTEGER,
                        isDescription
                                DisplayString,
                        isResponseTime
                                DisplayString,
                        isResponseTimeInteger
                                INTEGER,
                        isTimeExceeded
                                INTEGER,
                        isMaxWait
                                INTEGER,
                        isLevel
                                DisplayString,
                        isError
                                INTEGER,
                        isBytesRead
                                INTEGER,
                        isThroughPut
                                INTEGER,
                        isPortNumber
                                INTEGER,
                        isPortType
                                INTEGER,
                        isOptions
                                INTEGER,
                        isNRequests
                                INTEGER,
                        isInterval
                                INTEGER,
                        isRequestNumber
                                INTEGER,
                        isEventType
                                INTEGER,
                        isEprog
                                DisplayString,
                        isEmail
                                DisplayString,
                        isEpager
                                DisplayString,
                        isResponseType
                                INTEGER,
                        isResponseReason
                                DisplayString,
                        isLastAttempt
                                DisplayString,
                        isNCFails
                                INTEGER,
                        isNCFailsAlert
                                INTEGER,
                        isFirstFailed
                                DisplayString,
                        isFileType
                                DisplayString,
                        isIPAddr
                                IpAddress,
                        isData
                                DisplayString
                }

        isIndex OBJECT-TYPE
                SYNTAX  INTEGER 
                ACCESS  read-only
                STATUS  mandatory
                DESCRIPTION
                        "A unique value for each URL entry. Its
                        value ranges between 1 and isNumber.  Row/
                        index numbers start at row 1.
                        around to 0, etc."
                ::= { isEntry 1 }

        isRequestName OBJECT-TYPE
                SYNTAX  DisplayString (SIZE (0..31))
                ACCESS  read-write
                STATUS  mandatory
                DESCRIPTION
                        "The name of the ServiceWatch request."
                ::= { isEntry 2 }


        isStatus OBJECT-TYPE
                SYNTAX  RequestStatus
                ACCESS  read-write
                STATUS  mandatory
                DESCRIPTION
                        "See 'RequestStatus' definition for possible
                        values, except the  value of isStatus will
                        never be notReady(3): if this row exists, it
                        will ALWAYS be ready.  The notReady(3) value
                        typically means the row exists, but was missing
                        information.  In this case, ServiceWatch
                        automatically fill in defaults for any values
                        that were missing, so notReady(3) will NEVER
                        set here."
                ::= { isEntry 3 }

        isURL OBJECT-TYPE
                SYNTAX  DisplayString (SIZE (0..255))
                ACCESS  read-write
                STATUS  mandatory
                DESCRIPTION
                        "The URL monitored.  You can add new URLs
                        to be monitored by setting a URL in isURL."
                ::= { isEntry 4 }

        isUsername OBJECT-TYPE
                SYNTAX  DisplayString (SIZE (0..31))
                ACCESS  read-write
                STATUS  mandatory
                DESCRIPTION
                        "The username to use for access to the network service.
                        Currently used for web and ftp services only."
                ::= { isEntry 5 }

        isPassword OBJECT-TYPE
                SYNTAX  DisplayString (SIZE (0..31))
                ACCESS  read-write
                STATUS  mandatory
                DESCRIPTION
                        "A password to use for access to the network service.
                        Currently used for web and ftp services only."
                ::= { isEntry 6 }

        isProxy OBJECT-TYPE
                SYNTAX  DisplayString (SIZE (0..31))
                ACCESS  read-write
                STATUS  mandatory
                DESCRIPTION
                        "The hostname of a web proxy server, if any.
                        If an isProxy server is set to a web
                        proxy server name, the request will be sent
                        to the proxy server, instead of directly
                        to the hostname specified in the URL."
                ::= { isEntry 7 }

        isServiceStatus OBJECT-TYPE
                SYNTAX  INTEGER {
                        up(1),
                        down(2),
                        unknown(3)
                }
                ACCESS  read-only
                STATUS  mandatory
                DESCRIPTION
                        "The current operational state of the server."
                ::= { isEntry 8 }

        isDescription OBJECT-TYPE
                SYNTAX  DisplayString (SIZE (0..127))
                ACCESS  read-only
                STATUS  mandatory
                DESCRIPTION
                        "A textual description of the server software."
                ::= { isEntry 9 }
        
        isResponseTime OBJECT-TYPE
                SYNTAX  DisplayString (SIZE (0..15)) 
                ACCESS  read-only
                STATUS  mandatory
                DESCRIPTION
                        "The response time, in seconds, for the server
                        to complete the request. Note: A string containing a
                        floating point number: real floating point values
                        do not exist in the SNMP protocol, so a floating
                        point string is used.  For the response time as
                        an integer, refer to 'isResponseTimeInteger.'"
                ::= { isEntry 10 }

        isResponseTimeInteger OBJECT-TYPE
                SYNTAX  INTEGER
                ACCESS  read-only
                STATUS  mandatory
                DESCRIPTION
                        "The response time, in seconds, for the server
                        to complete the request.  (An integer.)"
                ::= { isEntry 11 }

        isTimeExceeded OBJECT-TYPE
                SYNTAX  INTEGER {
                        true(1),
                        false(2),
                        unknown(3)
                }
                ACCESS  read-only
                STATUS  mandatory
                DESCRIPTION
                        "The time for the server to complete the request
                        exceeded maximum amount of time allowed. (See
                        the isMaxWait variable which is related to this
                        variable.) The request to the server was consequently
                        aborted  It will be set to unknown(3) if the
                        request is not active."
                ::= { isEntry 12 }

        isMaxWait OBJECT-TYPE
                SYNTAX  INTEGER 
                ACCESS  read-write
                STATUS  mandatory
                DESCRIPTION
                        "The maximum amount of time to wait before timing out
                        during an attempt to perform a query on the server."
                ::= { isEntry 13 }

        isLevel OBJECT-TYPE
                SYNTAX  DisplayString (SIZE (0..15)) 
                ACCESS  read-write
                STATUS  mandatory
                DESCRIPTION
                        "The error level to set when an event occurs for
                         this URL.  The type of error level can be determined
                         by the user: For example 1-10, or 'low', 'medium', 'high',
                         etc."
                ::= { isEntry 14 }

        isError OBJECT-TYPE
                SYNTAX  INTEGER {
                        none(1),
                        connection-timed-out(2),
                        transmission-to-server-failed(3),
                        receiving-from-server-failed(4),
                        connect-to-server-failed(5),
                        transfer-time-exceeded-maximum(6),
                        web-retrieval-request-error(7),
                        dns-warning-query-format-error(8),
                        dns-warning-server-failure(9),
                        dns-warning-name-error(10),
                        dns-warning-has-not-implemented-this-kind-of-query(11),
                        dns-warning-refused-to-perform-query(12),
                        dns-warning-unknown-server-reply(13),
                        dns-warning-incorrect-id-returned(14),
                        dns-warning-response-not-in-correct-format(15),
                        no-answer-from-server-after-connection(16),
                        smtp-error-No-answer-after-connection(17),
                        gopher-error-No-answer-after-request(18),
                        smtp-error-Unexpected-response-maybe-wrong-port(19),
                        unused(20),
                        hostname-in-URL-not-found-via-name-service(21),
                        bad-protocol-type-in-URL(22),
                        unknown-monitoring-failure(23),
                        child-poller-never-received-a-request(24),
                        child-poller-died-unexpectedly(25),
                        could-not-create-pipe-for-child(26),
                        could-not-run-the-ServiceWatch-polling-program(27),
                        could-not-fork-child-process(28),
                        client-bootp-or-dhcp-port-used-by-another-process(29),
                        telnet-error-appeared-to-not-be-a-telnet-server(30),
                        telnet-error-server-could-not-accept-reply(31),
                        ping-record-route-option-set-failed(32),
                        unknown-error(33),
                        unknown-error(34),
                        could-not-exec-extensible-program(35),
                        extensible-directory-missing-or-inaccessible(36),
                        extensible-monitoring-filename-missing(37),
                        extensible-file-open-failure(38),
                        pipe-failure(39),
                        protocol-specific-error(40),
                        extend-program-sent-no-results(41),
                        unknown-protocol-or-API-not-licensed(42),
                        unknown-error(43),
                        unknown-error(44),
                        unknown-error(45),
                        unknown-error(46),
                        unknown-error(47),
                        unknown-error(48),
                        unknown-error(49),
                        ssl-feature-not-enabled(50),
                        ssl-connection-timed-out(51),
                        ssl-connection-failed(52),
                        unknown-error(53),
                        unknown-error(54),
                        snmp-no-such-objectid(55),
                        snmp-no-such-name(56),
                        snmp-error-response(57),
                        unknown-error(58),
                        could-not-create-socket(59),
                        could-not-determine-our-enet-addr(60),
                        invalid-server-response(61),
                        unknown-error(62),
                        unknown-error(63),
                        unknown-error(64),
                        unknown-error(65),
                        unknown-error(66),
                        unknown-error(67),
                        unknown-error(68),
                        unknown-error(69),
                        unknown-error(70)
                }
                ACCESS  read-only
                STATUS  mandatory
                DESCRIPTION
                        "The type of error that occurred (if any)."
                ::= { isEntry 15 }

        isBytesRead OBJECT-TYPE
                SYNTAX  INTEGER
                ACCESS  read-only
                STATUS  mandatory
                DESCRIPTION
                        "The number of data bytes read from the server
                        on the last request."
                ::= { isEntry 16 }

        isThroughPut OBJECT-TYPE
                SYNTAX  INTEGER 
                ACCESS  read-only
                STATUS  mandatory
                DESCRIPTION
                        "The rate of bytes per second read from the server
                        on the last request."
                ::= { isEntry 17 }

        isPortNumber OBJECT-TYPE
                SYNTAX  INTEGER 
                ACCESS  read-only
                STATUS  mandatory
                DESCRIPTION
                        "The TCP/IP or UDP/IP port number used to
                        contact the network server.  You specify the port
                        number to use in isURL."
                ::= { isEntry 18 }

        isPortType OBJECT-TYPE
                SYNTAX  INTEGER  {
                        tcp(1),
                        udp(2)
                }
                ACCESS  read-write
                STATUS  mandatory
                DESCRIPTION
                        "For DNS, isPortType can be either TCP or UDP.  For
                        other protocols, it can be only TCP, since the
                        other protocols speak only TCP."
                ::= { isEntry 19 }

        isOptions OBJECT-TYPE
--              SYNTAX  BITSTRING {
--                      none(1),
--                      noQuery(2),
--                      reResolve(4),
--                      proxyNocache(8),
--                      logAll(32),
--                      notifyStateChange(64)
--                      allEprog(128)
--                      traceroute(256)
--                      disableAutoStart(512)
--                      sslWorkarounds(1024)
--
--              }
                SYNTAX  INTEGER
                ACCESS  read-write
                STATUS  mandatory
                DESCRIPTION
                        "Options (bitstring) on how the server will
                         be contacted.  You can add these together
                         to set more than one option:
                        none(1):
                                By defaut, a sample query to the server
                                will be performed.
                        noQuery(2):
                                Do not attempt to do a query to the
                                network server (it will only check
                                the port to determine if there
                                IS a server there.
                        reResolve(4):
                                Reresolve the hostname into an
                                IP address immediately before
                                EACH attempted contacted with the
                                network server.
                        proxyNocache(8):
                                When using a proxy server, inform
                                the proxy server to not use its
                                cache.
                        logAll(32):
                                Log information from all poll requests
                                to the log file.  (Otherwise, only
                                exceptions/traps will be logged.)
                        notifyStateChange(64):
                                Notify ONLY on a state change of
                                a network service.  For example,
                                notify only if 1) A service has been
                                down exactly NCFailsAlert times,  OR:
                                2) A service has been down and then
                                comes back up.  Note: If
                                NotifyStateChange is set, then only 1
                                notification will occur until/unless
                                the network server comes up again.

                                The KIND of notification done (trap
                                and/or log to a file and/or run a
                                program) is determined by the
                                isEventType variable.
                        allEprog(128):
                                Run the program specified in isEprog after EACH
                                poll attempt to the service (rather than only
                                when there is an event, etc.).
                        traceRoute(256):
                                If an event occurs and email is sent (isEmail
                                is set), then include a traceroute to the
                                host that had the failed network service.
                        disableAutoStart(512):
                                Do not start this request during 'Start
                                All Requests' or system reboots.
                        sslWorkarounds(1024):
                                Enable SSL bug workarounds."
                ::= { isEntry 20 }

        isNRequests OBJECT-TYPE
                SYNTAX  INTEGER
                ACCESS  read-write
                STATUS  mandatory
                DESCRIPTION
                        "The number of times to perform the request."
                ::= { isEntry 21 }

        isInterval OBJECT-TYPE
                SYNTAX  INTEGER
                ACCESS  read-write
                STATUS  mandatory
                DESCRIPTION
                        "The number of seconds to wait, after the
                        completion of the last request, before
                        starting the next request."
                ::= { isEntry 22 }

        isRequestNumber OBJECT-TYPE
                SYNTAX  INTEGER
                ACCESS  read-only
                STATUS  mandatory
                DESCRIPTION
                        "The request number (relates to isNRequests and
                        isInterval."
                ::= { isEntry 23 }

        isEventType OBJECT-TYPE
--              SYNTAX  BITSTRING {
--                      none(1),
--                      log(2),
--                      snmp-trap(4),
--              }
                SYNTAX  INTEGER
                ACCESS  read-write
                STATUS  mandatory
                DESCRIPTION
                        "The type of notification that will be
                        performed.  Add all of the options you wish to
                        use and set isEventType to the total of these
                        options.  For example, if you want logging to a
                        file (2) and an snmp-trap to be sent (4), then
                        set isEventType to 6 (2 + 4).  The default is
                        snmp-trap(4).  The possible choices are:

                        none(1):
                                No logging is performed.  If this
                                bit is set, all other bits are
                                then cleared in this variable.
                        log(2):
                                Logging to a file is performed.
                        snmp-trap(4):
                                Sending an SNMP trap is performed."
                ::= { isEntry 24 }

        isEprog OBJECT-TYPE
                SYNTAX  DisplayString (SIZE (0..1023))
                ACCESS  read-write
                STATUS  mandatory
                DESCRIPTION
                        "The filename of the program to run when
                        an event occurs (or after every poll attempt if
                        isOptions has allEprog set)."
                ::= { isEntry 25 }

        isEmail OBJECT-TYPE
                SYNTAX  DisplayString (SIZE (0..127))
                ACCESS  read-write
                STATUS  mandatory
                DESCRIPTION
                        "The email address to send email when
                        an event occurs.  If this variable is
                        not null, then email will be sent to
                        this email address when an event
                        occurs."
                ::= { isEntry 26 }

        isEpager OBJECT-TYPE
                SYNTAX  DisplayString (SIZE (0..127))
                ACCESS  read-write
                STATUS  mandatory
                DESCRIPTION
                        "The email address of an alphanumeric pager to
                        send email formatted for a pager when an event occurs.
                        If this variable is not null, then email formatted for
                        alphanumeric pagers will be sent to this email
                        address when an event occurs."
                ::= { isEntry 27 }

        isNCFails OBJECT-TYPE
                SYNTAX  INTEGER
                ACCESS  read-only
                STATUS  mandatory
                DESCRIPTION
                        "The number of CONSECUTIVE failures when
                        attempting to complete the request to a
                        network server."
                ::= { isEntry 28 }
                        
        isNCFailsAlert OBJECT-TYPE
                SYNTAX  INTEGER
                ACCESS  read-write
                STATUS  mandatory
                DESCRIPTION
                        "Report a failure when isNCFailsAlert consecutive
                        failures have occurred.  Failures are reported
                        as defined by the isEventType variable.
                        The default for isNCFailsAlert is 1:  After
                        1 failure, report it."
                ::= { isEntry 29 }

        isResponseType OBJECT-TYPE
                SYNTAX  INTEGER 
                ACCESS  read-only
                STATUS  mandatory
                DESCRIPTION
                        "The response type as returned from the server.
                        For example 200-299 means the request succeeded,
                        400-499 are bad requests, etc."
                ::= { isEntry 30 }
        
        isResponseReason OBJECT-TYPE
                SYNTAX  DisplayString (SIZE (0..127))
                ACCESS  read-only
                STATUS  mandatory
                DESCRIPTION
                        "A textual description of the server's
                        response type, as returned from the server.
                        (This response should contain the string
                        describing the responseType byte.)"
                ::= { isEntry 31 }
        
        isLastAttempt OBJECT-TYPE
                SYNTAX  DisplayString (SIZE (0..31))
                ACCESS  read-only
                STATUS  mandatory
                DESCRIPTION
                        "The last time that this agent attempted to contact
                        the network server.  The format returned:
                                 Thu Oct  3 13:18:50 1996
                        "
                ::= { isEntry 32 }

        isFirstFailed OBJECT-TYPE
                SYNTAX  DisplayString (SIZE (0..31))
                ACCESS  read-only
                STATUS  mandatory
                DESCRIPTION
                        "The first time the network service failed this round
                        of failures.  The format returned:
                                 Tue Jan  4 23:08:21 2000"
                ::= { isEntry 33 }
        
        isFileType OBJECT-TYPE
                SYNTAX  DisplayString (SIZE (0..15))
                ACCESS  read-only
                STATUS  mandatory
                DESCRIPTION
                        "The retrieved file's type, such as text/html,
                        image/gif etc. (Applies to web servers only,
                        currently)."
                ::= { isEntry 34 }
        
        isIPAddr OBJECT-TYPE
                SYNTAX  IpAddress
                ACCESS  read-only
                STATUS  mandatory
                DESCRIPTION
                        "The IP address to which this entry's monitoring
                        information pertains."
                ::= { isEntry 35 }
        
        isData OBJECT-TYPE
                SYNTAX  DisplayString (SIZE (0..516))
                ACCESS  read-only
                STATUS  mandatory
                DESCRIPTION
                        "Additional information or data returned from the sample request."
                ::= { isEntry 36 }

--  **********************************************************************
--  is traps (server up/down)
--  **********************************************************************


        isTraps         OBJECT IDENTIFIER ::= { dmsMib 2 }
        
        serverFailed TRAP-TYPE
                ENTERPRISE isTraps
                VARIABLES
                        {
                                isURL,
                                isUsername,
                                isProxy,
                                isServiceStatus,
                                isResponseTimeInteger,
                                isTimeExceeded,
                                isMaxWait,
                                isLevel,
                                isError,
                                isPortNumber,
                                isPortType,
                                isResponseType,
                                isResponseReason,
                                isRequestNumber,
                                isNCFails,
                                isNCFailsAlert,
                                isLastAttempt
                        }
                DESCRIPTION
                        "The network server failed to correctly reply
                        to the request in the time allowed."
                --#SUMMARY "Received ServiceWatch 'down' event $E, $# args: $*"
                --#SEVERITY MAJOR
                ::= 1

        serverUp TRAP-TYPE
                ENTERPRISE isTraps
                VARIABLES
                        {
                                isURL,
                                isUsername,
                                isProxy,
                                isServiceStatus,
                                isResponseTimeInteger,
                                isTimeExceeded,
                                isMaxWait,
                                isLevel,
                                isError,
                                isPortNumber,
                                isPortType,
                                isResponseType,
                                isResponseReason,
                                isRequestNumber,
                                isNCFails,
                                isNCFailsAlert,
                                isLastAttempt
                        }
                DESCRIPTION
                        "If notifyStateChange is set in isOptions and
                        the state of the network service changed from
                        down to up, then a 'serverUp' trap is sent."
                --#SUMMARY "Received ServiceWatch 'up' event $E, $# args: $*"
                --#SEVERITY NORMAL
                ::= 2

--  **********************************************************************
--  dms start/stop traps.
--  **********************************************************************

        dmsTraps                OBJECT IDENTIFIER ::= { dmsMib 3 }

        dmsStart TRAP-TYPE
                ENTERPRISE dmsTraps
                DESCRIPTION "This trap is sent when the ServiceWatch agent starts"
                --#SUMMARY "ServiceWatch SNMP agent started."
                --#SEVERITY NORMAL
                ::= 1

        dmsShutdown TRAP-TYPE
                ENTERPRISE dmsTraps
                DESCRIPTION "This trap is sent when the ServiceWatch agent terminates"
                --#SUMMARY "ServiceWatch SNMP agent terminated."
                --#SEVERITY WARNING
                ::= 2
END
OID .1.3.6.1.4.1.1931OID .1.3.6.1.4.1.1931.1OID .1.3.6.1.4.1.1931.1.1OID .1.3.6.1.4.1.1931.1.1.1OID .1.3.6.1.4.1.1931.1.1.2OID .1.3.6.1.4.1.1931.1.1.3OID .1.3.6.1.4.1.1931.1.1.3.1OID .1.3.6.1.4.1.1931.1.1.3.1.1OID .1.3.6.1.4.1.1931.1.1.3.1.2OID .1.3.6.1.4.1.1931.1.1.3.1.3OID .1.3.6.1.4.1.1931.1.1.3.1.4OID .1.3.6.1.4.1.1931.1.1.3.1.5OID .1.3.6.1.4.1.1931.1.1.3.1.6OID .1.3.6.1.4.1.1931.1.1.3.1.7OID .1.3.6.1.4.1.1931.1.1.3.1.8OID .1.3.6.1.4.1.1931.1.1.3.1.9OID .1.3.6.1.4.1.1931.1.1.3.1.10OID .1.3.6.1.4.1.1931.1.1.3.1.11OID .1.3.6.1.4.1.1931.1.1.3.1.12OID .1.3.6.1.4.1.1931.1.1.3.1.13OID .1.3.6.1.4.1.1931.1.1.3.1.14OID .1.3.6.1.4.1.1931.1.1.3.1.15OID .1.3.6.1.4.1.1931.1.1.3.1.16OID .1.3.6.1.4.1.1931.1.1.3.1.17OID .1.3.6.1.4.1.1931.1.1.3.1.18OID .1.3.6.1.4.1.1931.1.1.3.1.19OID .1.3.6.1.4.1.1931.1.1.3.1.20OID .1.3.6.1.4.1.1931.1.1.3.1.21
OID .1.3.6.1.4.1.1931.1.1.3.1.22OID .1.3.6.1.4.1.1931.1.1.3.1.23OID .1.3.6.1.4.1.1931.1.1.3.1.24OID .1.3.6.1.4.1.1931.1.1.3.1.25OID .1.3.6.1.4.1.1931.1.1.3.1.26OID .1.3.6.1.4.1.1931.1.1.3.1.27OID .1.3.6.1.4.1.1931.1.1.3.1.28OID .1.3.6.1.4.1.1931.1.1.3.1.29OID .1.3.6.1.4.1.1931.1.1.3.1.30OID .1.3.6.1.4.1.1931.1.1.3.1.31OID .1.3.6.1.4.1.1931.1.1.3.1.32OID .1.3.6.1.4.1.1931.1.1.3.1.33OID .1.3.6.1.4.1.1931.1.1.3.1.34OID .1.3.6.1.4.1.1931.1.1.3.1.35OID .1.3.6.1.4.1.1931.1.1.3.1.36OID .1.3.6.1.4.1.1931.1.2TRAP .1.3.6.1.4.1.1931.1.2.1TRAP .1.3.6.1.4.1.1931.1.2.0.1TRAP .1.3.6.1.4.1.1931.1.2.0.0.1TRAP .1.3.6.1.4.1.1931.1.2.2TRAP .1.3.6.1.4.1.1931.1.2.0.2TRAP .1.3.6.1.4.1.1931.1.2.0.0.2OID .1.3.6.1.4.1.1931.1.3TRAP .1.3.6.1.4.1.1931.1.3.1TRAP .1.3.6.1.4.1.1931.1.3.0.1TRAP .1.3.6.1.4.1.1931.1.3.0.0.1TRAP .1.3.6.1.4.1.1931.1.3.2TRAP .1.3.6.1.4.1.1931.1.3.0.2TRAP .1.3.6.1.4.1.1931.1.3.0.0.2OID .1.3.6.1.4.1.1931.250OID .1.3.6.1.4.1.1931.250.1OID .1.3.6.1.4.1.1931.250.2OID .1.3.6.1.4.1.1931.250.3OID .1.3.6.1.4.1.1931.250.4OID .1.3.6.1.4.1.1931.250.5OID .1.3.6.1.4.1.1931.250.6OID .1.3.6.1.4.1.1931.250.7OID .1.3.6.1.4.1.1931.250.8OID .1.3.6.1.4.1.1931.250.9OID .1.3.6.1.4.1.1931.250.10OID .1.3.6.1.4.1.1931.250.11OID .1.3.6.1.4.1.1931.250.12OID .1.3.6.1.4.1.1931.250.13OID .1.3.6.1.4.1.1931.250.255